Loading ...
Loading ...
Loading ...
29
CLEANING
WARNING
WARNING
Make sure the appliance is turned off before you remove
or replace parts, to avoid the possibility of electric shock.
Releasing the grill element
We have designed the upper element with a hanger clip
to help you reach your oven roof for cleaning.
Retaining wire models
• Lift element up carefully.
• Pull hanger clip to the left or right to unhook it.
The element will drop down freely.
Rotating latch models
• Rotate latch 180º. The element will drop down freely.
Replacing the oven top light (POR883 model only)
WARNING
WARNING
Turn the appliance off at the main switch to make sure
there is no power to the oven.
• The top light is positioned behind the grill deflector
at the top of the oven.
• To remove the globe the shelves should first be
removed from the oven.
• Insert a small screw driver into the glass cutout
between the two metal clips on the left hand side,
as shown in diagram.
• Gently lever the glass cover off, by pushing the screw
driver in and moving it upwards, whilst holding the
glass cover with the other hand. (If not supported,
the glass cover can fall and break).
• Remove the faulty globe by pulling it directly out of
its holder.
• Replace the old globe with a new one, ensuring not to
directly touch the surface of the globe with your fingers.
(A tissue or soft cloth is best for this.)
• Pick up the glass cover and place short edge into
right side of housing; push up opposite end of
glass cover until it snaps into position.
• Resecure the top element in place.
CLEANING YOUR APPLIANCE
Loading ...
Loading ...
Loading ...