Loading ...
Loading ...
Loading ...
20
OPERATION
MODEL POR881 ELECTRONIC CLOCK
Setting the timer
1. Press TIMER button until the
display begins to flash.
2. Set the countdown time you want by using – and +.
Commence with setting the number of seconds first.
The minutes and hours can then be set by subsequently
pressing the TIMER again and adjusting using the – and
+ buttons. 5 seconds after the last change the timer will
stop flashing, confirming the timer has been set.
3. To cancel the timer press the timer button until the
display flashes. Then press and hold + and – buttons
until the timer is cleared.
4. To stop the beeper, press –, + or TIMER buttons
Note: The clock display cannot be selected when the timer
is operating.
Elapsed Time
When an oven function is selected (other than pyrolytic
clean) and elapsed timer commences on the display
1. To reset this timer press and hold both the + and –
buttons until the timer is reset.
Displaying the cavity temperature
1. During operation of the oven the current oven
temperature during pre-heating of the oven can be
displayed by pressing the TEMP button. During normal
operation the set temperature can be reviewed by
pressing the TEMP button.
Note: This temperature will only be displayed for
approximately 5 seconds.
Light operation
1. During operation of the oven the lamp can be switched
off by pressing and holding the TIMER button until the
light turns off. Also the light can be turned on from the
standby state by pressing and holding the TIMER button
until the light comes on.
Activating the child-proof lock
When the child lock is engaged, the oven cannot be
operated and the door cannot be opened
1. Switch off the appliance using the function selector switch.
2. Press and hold the CLOCK and + buttons at the same
time until the word ‘SAFE’ is displayed and a double
beep is sounded. The word safe will be replaced by a
padlock symbol on the display after 5 seconds.
Releasing the child-proof lock
1. Press and hold the CLOCK and + buttons at the
same time until a double beep is sounded. This will
commence to unlock the door and after 5 seconds
the oven is ready for use.
Switching the clock display ON and OFF
1. Press together + and – for 2 seconds to switch ‘off’
the display.
2. Press together + and – for 2 seconds to switch the clock
display ‘on’ again.
3. When the display is set to the ‘off’ state, pressing the
+ or – button momentarily will display the time for 5
seconds then turn off the display.
4. When the display is set to the ‘off’ state, turning on the
oven will turn the display ‘on’ for the duration of oven
operation. Once the function is turned ‘off’ the display
will turn off after 5 seconds.
Note: If a timer mode is set or the oven is operating, then it
is not possible to switch the display off.
Safety Cut-out feature
The oven automatically switches itself off if the temperature
is not adjusted or the appliance is left operating after a
period of time. The oven switches itself off after:
• 12.5 hours when the temperature is set less than 120°C.
• 8.5 hours when the temperature is set to 120°C or
above, and below 200°C.
• 5.5 hours when the temperature is set to 200°C or
above, and below 250°C.
• 3.0 hours when the temperature is set at 250°C.
DEMO Mode
The oven can be set to operate in a demo (e.g. in a retail
store) mode. In this mode the oven does not actually heat
if the oven has been inadvertently supplied in this mode.
The following instructions demonstrate how to exit this mode.
1. Ensure the oven is in the ‘off’ state. Press and hold the +
button until a beep sounds. The ‘Demo’ text will begin
to flash.
2. While holding the + button turn the function selector to
the first oven function until another beep is heard.
3. Then turn the function selector to the ‘off’ position.
4. Release the + button.
5. Toggle and hold the temperature selector to the right (+)
until 3 beeps sound.
The ‘Demo’ text will no longer be lit and the oven will
function normally. If the ‘Demo’ test is still present then
repeat the above procedure.
Loading ...
Loading ...
Loading ...