Loading ...
Loading ...
Loading ...
19
OPERATION
General features
Your 5 button touch control clock has the following features:
• TIMER – allows you to set a countdown time that will
beep when the set time has elapsed.
• The TEMP button allows the current temperature of the
oven to be displayed.
• Elapsed time display.
Setting the time of day
You must set the time of day before you can operate
your appliance.
When power is supplied to your oven “12.00“ will be
displayed on the clock and the display will flash.
1. To set the time of day hours, press – or +, then press
CLOCK and the seconds will begin to flash which can
be set by pressing the – or + buttons. 5 seconds after
the last change, the clock display will stop flashing,
confirming that the time has been set.
Note: The clock has a 24-hour display.
Change the time of day (Daylight saving)
1. Press CLOCK until the clock display begins to flash.
2. Press – or + to change the hours then press CLOCK
and the minutes will begin to flash which can be set
by pressing the – or + buttons. 5 seconds after the last
change, the “clock” symbol will disappear, confirming
the time has been set.
Note: The clock has a 24-hour display.
Setting the oven function
1. Turn the oven function selector clockwise to select the
desired oven function.
Note: Each oven function has a default temperature
which can then be adjusted as outlined below.
Changing the oven temperature
1. Toggle the temperature selector left(–) or right(+)
as required to set the desired cooking temperature.
Note: The temperature can be adjusted at any time
throughout the cooking time.
Setting the cooking time
1. Select the desired oven function and cooking
temperature.
2. Press the CLOCK button as often as necessary,
until the “cook time” ❘➔❘ symbol appears.
3. Set the desired cooking time commencing with minutes
by using the – or +, whilst the ❘➔❘ symbol is flashing,
then press the CLOCK button again and set the hours
by using the – or + buttons. After 5 seconds from the
last time adjustment the ❘➔❘ symbol will disappear and
your appliance is now programmed.
4. When the set time has elapsed, a signal will sound.
To stop the signal, press any button on the clock and
then turn the oven function selector to OFF.
Note: Cooking time cannot be set for the Rapid Heat
function.
Setting the stop time
1. Select the desired oven function and cooking
temperature.
2. Press the CLOCK button as often as necessary,
until the “end time” ➔❘ symbol appears flashing.
3. Set the desired stop time commencing with hours using
the – or + whilst the ➔❘ symbol is flashing, then press
the CLOCK button again and set the minutes by using
the – or + buttons. After 5 seconds from the last time
adjustment the ➔❘ symbol will disappear and your
appliance is now programmed.
4. When the set time has elapsed, a signal will sound.
To stop the signal, press any button on the clock and
then turn the oven function selector to OFF.
Note: Stop time cannot be set for the Rapid Heat function.
Setting the delayed start cooking time
The “cook time” and “stop time” functions can be combined
to switch the oven on and off at a specific time during
the day.
1. Select the desired oven function and cooking
temperature.
2. Press “CLOCK” as often as necessary, until the “cook
time” ❘➔❘ symbol appears.
3. Set the desired cooking time by using – or + , whilst the
“timer arrow” ❘➔❘ symbol is flashing.
4. Press CLOCK as often as necessary, until the “end time”
➔❘ symbol appears flashing.
5. Set the desired switch-off time using the – or + whilst
the ❘➔❘ symbol is flashing. The “cook time” ❘➔❘ and “end
time” ➔❘ arrows are lit to confirm that the oven has
been programmed.
Note: Delayed start cooking time cannot be set for the
Rapid Heat function.
MODEL POR881 ELECTRONIC CLOCK
Loading ...
Loading ...
Loading ...