Loading ...
Loading ...
Loading ...
AUXILIARY FENCE/WORK SUPPORT
Make one using a piece of 3t8 in. and 3/4 in. Plywood.
Fasten together with glue and wood screws.
NOTE: Since the Push Block is used with the Auxiliary
Fence, the 4-3/4 in. dimensions must be held identical
on both the pieces.
THIS FACE AND
EDGE MUST BE
PARALLEL
3/8 PLYWOOD
NOTE All dimension in qches_"'_ 5"1/2
AUXILIARY FENCE!WORK SUPPORT
1-1/4
AUXILIARY PANEL WORK SUPPORT
Make using a piece of 3/4" and 3/8" plywood. Fasten
together with glue and wood screws. Use this auxiliary
panel work support only when cutting large panels that
require the rip fence to be positioned past the exposed
side of the extension,
3/4 PLYWOOD
3-5/8
FACE & EDGE
MUST BE "_
.I
PARALLEL _"
/ 2""
3/8 PLYWOOD
NOTE: All dimension in inches
AUXILIARY PANEL/WORK SUPPORT
SAFETY INSTRUCTIONS FOR
BEFORE EACH USE:
1. Inspect your saw.
a. To avoid injury from accidental starting, unplug
the saw, turP, the switch off and remove the
switch key before raising or removing the
guard, changing the cutting tool, changing
the setup or adjusting anything.
b. Check for alignment of moving parts, binding
of moving parts, breakage of parts mounting,
and any other conditions that may affect the
way it works. If any part is missing, bent, or
broken in any way, or any electrical parts don't
work properly, turn the saw off and unplug the
saw.
c. Replace damaged, missing, or failed parts
before using the saw again.
d. Use the sawblade guard, spreader, and anti-
piece). Make sure the pawls work properly.
BASIC SAW OPERATIONS
Make sure the spreader is in line with the
sawblade,
REMOVE ADJUSTING KEYS AND
WRENCHES. Form habit of checking for and
removing keys and adjusting wrenches from
tool before turning _ton.
To avoid injury from jams, slips or thrown
pieces (kickback and throwback):
1. USE ONLY RECOMMENDED ACCESSO-
RIES (See page 42) - Follow the instructions
that comewiththeaccessories. Usingother
accessories may be dangerous.
2. Choose the right blade or cutting accessory
for the matedal and the type of cutting you
plan to de.
3, Never use grinding wheels, abrasive cut-off
wire wheels or buffing wheel. They can fly
apart explosively.
Loading ...
Loading ...
Loading ...