Loading ...
Loading ...
Loading ...
_, WARNING: To avoid serious personal injury, always keep hands outside
the "No Hands Zone", as marked on the saw table, which is at least 3 inches
(7.6 cm) from the blade. Also, never perform any cutting operation "freehand"
(i.e. without holding the workpiece against the fence); the blade could grab the
workpiece, causing it to slip and twist.
15. Make sure that there will be no obstructions to interfere with making the cut.
16. Turn on the laser switch.
17. To turn on the saw, push the safety-lock button in with your thumb while
squeezing the On/Off trigger switch located under the handle. Allow several
seconds for the blade to reach maximum speed.
18. Slowly lower the blade into and through the workpiece.
19. Release the safety lock and trigger switch, and turn off the laser switch.
Allow the saw blade to stop rotating before raising the blade out of the workpiece.
CUTTING COMPOUND MITERS
To help make the correct settings, use the compound angle setting chart below.
Since compound cuts are the most difficult to accurately achieve, plan carefully
and make trial cuts in scrap material prior to making your required cut.
COMPOUND-ANGLE SETTINGS FOR POPULAR STRUCTURES
*Pitch of Side = Angle of side from vertical, Example: i.!_/
,'//:
*PITCH i_ulvlo=, ur _Juco
OF SIDE 3 4 5 6 7 8
M-45.00 ° M-36.00 ° M-30.00 ° M-25.71° M-22.50 ° M-20.00 ° M-18.00 °
O° B- 0.00° B- 0.00 ° B- 0.00° B- 0.00 ° B- 0.00 ° B- 0.00 ° B- 0.00 °
5° M-44.89 ° M-35.90 ° M-29.91 ° M-25.63 ° M-22.42 ° M-19.93 ° M-17.94 °
B- 3.53 ° B- 2.94 ° B- 2.50 ° B- 2.17 ° B- 1.91 ° B- 1.71 ° B- 1.54 °
10° M-44"56° M-35"58° M-29"62° M-25"37° M-22"19° M-19"72° M-17"74°
B- 7.05 ° B- 5.86 ° B- 4.98 ° B- 4.32 ° B- 3.81 ° B- 3.40 ° B- 3.08 °
15° M-44.01 ° M-35.06 ° M-29.15 ° M-24.95 ° M-21.81 ° M-19.37 ° M-17.42 °
B-10.55 ° B- 8.75° B- 7.44 ° B- 6.45 ° B- 5.68° B- 5.08 ° B- 4.59 °
M-43.22 ° M-34.32 ° M-28.48 ° M-24.35 ° M-21.27 ° M-18.88 ° M-16.98 °
200 B-14.00 ° B-11.60 ° B- 9.85 ° B- 8.53 ° B- 7.52 ° B- 6.72 ° B- 6.07 °
M-42.19 ° M-33.36 ° M-27.62 ° M-23.35 ° M-20.58 ° M-18.26 ° M-16.41 °
250 B-17.39 ° B-14.38 ° B-12.20 ° B-10.57 ° B- 9.31 ° B- 6.72 ° B- 7.50 °
M-40.89 ° M-32.18 ° M-26.57 ° M-22.64 ° M-19.73 ° M-17.50 ° M-15.72 °
300 B-20.70 ° B-17.09 ° B-14.48 ° B-12.53 ° B-11.03 ° B- 9.85 ° B- 8.89 °
M-39.32 ° M-30.76 ° M-25.31 ° M-21.53 ° M-18.74 ° M-16.60 ° M-14.90 °
350 B-23.93 ° B-19.70 ° B-16.67 ° B-14.41 ° B- 12.68 ° B- 11.31 ° B- 10.21 °
40 ° M-37.45° M-29.10 ° M-23.86 ° M-20.25 ° M-17.60 ° M-15.58 ° M-13.98 °
B-27.03 ° B- 22.20 ° B-18.75 ° B-16.19 ° B- 14.24 ° B- 12.70 ° B- 11.46 °
M-35.26 ° M-27.19 ° M-22.21 ° M-18.80 ° M-16.32 ° M-14.43 ° M-12.94 °
450 B-30.O0 ° B-24.56 ° B-20.70 ° B-17.87 ° B- 15.70 ° B- 14.00° B- 12.62 °
M-32.73 ° M-25.03 ° M-20.36 ° M-17.20 ° M-14.91 ° M-13.17 ° M-11.80 °
500 B-32.80 ° B- 26.76 ° B-22.52 ° B-19.41 ° B- 17.05 ° B- 15.19 ° B- 13.69 °
21228 Manual Revised 08-0307 Page 35
Loading ...
Loading ...
Loading ...