Loading ...
Loading ...
Loading ...
ID]_'_];;_i_e_]
KNOW THE COMPOUND MITER SAW (Fig. 1)
NOTE: Before attempting to use your saw, familiarize yourself with all of the
features, operating instructions, and safety requirements.
Your miter saw has a precision-built electric motor which should be connected
only to a 120-volt, 60-Hz AC ONLY power supply (normal household current).
Do not operate on direct current (DC): the large voltage drop will cause a loss of
power and the motor will overheat. If the saw does not operate when plugged
into a correct 120-volt, 60-Hz AC ONLY outlet, check the power supply. The saw
comes with an 8-ft. power cord (no adapter needed).
This Compound Miter Saw has the following features:
15.0 Amp motor: Provides power and torque for fast cuts.
On/Off trigger switch and safety lock-off button
LaserTrac cutting guide: provides a clear indication of the line to be cut.
Laser On/Off switch
Easy-to-read bevel and miter scales: miter cuts from 0° to 46° left and right
with positive stops at 0°, 15°, 22.5 °, 31.6 °, and 45° for precise cuts. Bevel cuts
from 0° to 46° left.
Ergonomically designed handle with molded-in comfort grip for maximum
control and comfort when cutting.
3 Craftsman® 10-in blades: 80-tooth, 100-tooth, and 120-tooth blades for
smooth cutting in all woods and wood-base materials.
Die-cast aluminum upper blade guard, table, fence, and base: lightweight
and durable.
Project ruler etched on right fence: for quick reference.
Hold-down clamp: mounts on left or right side of fence to securely
clamp workpiece.
Durable, high-impact-plastic lower blade guard: allows view of workpiece
and laser cutting line.
Dust-extraction port: attaches to dust bag with the factory-installed 1-1/4"
adapter and to shop vacuum (not included)
Easy-to-use knob and lever: for quick miter, bevel, and compound-miter
adjustments; no tools are needed.
Permanently lubricated 100% ball bearings for long tool life and smooth
operation. Saw arm locking pin: locks saw arm in down position when pushed
in. Pull locking pin out to release saw arm.
Arbor-lock button: stops arbor from rotating for easy blade changes.
_, WARNING: Do not allow familiarity with your saw to make you careless.
Remember that a careless fraction of a second is sufficient to inflict serious injury.
21228 Manual Revised 08-0307 Page 15
Loading ...
Loading ...
Loading ...