Loading ...
Loading ...
Loading ...
2. After lifting the saw out of the carton, place it on a flat, stable work surface
with sufficient space to permit inspection of the saw.
3. The miter saw has been shipped with the saw arm locked in the DOWN
position. To release the saw arm, press down slightly on the top of the saw
arm and pull out the locking pin.
4. The saw arm is spring operated: hold the arm and allow it to rise slowly. The
saw arm will automatically lift up and stay in the UP position to permit easy
placement of material in the cutting area.
5. When the saw is not in use, the saw arm should be locked in the DOWN
position. To lock the saw arm for transporting and for storage, press and
hold down the saw arm to the lowest position, then push the locking pin in.
6. Inspect the saw carefully to make sure that no breakage or damage has
occurred during shipping.
7. Check to make certain that all parts are accounted for. If any of the items
listed are missing, or any breakage or damage has occurred, return the saw
to your nearest Sears store or Craftsman outlet to have the saw replaced.
CARTON CONTENTS/LOOSE PARTS
ii
Extension rails
Miter-lock knob
_f''h
Hold-down clamp
Saw
L
BladeWrench DustBag
21228 Manual Revised 08-0307 Page 14
Loading ...
Loading ...
Loading ...