Loading ...
Loading ...
Loading ...
(67,1)
北米Model "A9020BE-B" EDITED: 2022/ 5/ 16
Each lower anchorage is located behind
the cover of seatback bottom.
CAUTION
When you install a child restraint
system, follow the manufacturer’s
instructions supplied with it. After
installing the child restraint system,
check to ensure that it is held
securely in position. If it is not held
tight and secure, the danger of your
child suffering personal injury in the
event of an accident may be in-
creased.
Peel off the anchorage cover completely
from the selected side of the rear seatback
to expose the anchorages (bars) to be
used for installation of the child restraint
system.
If it is hard to install the child restraint
system because the anchorage cover
returns to the original position, press the
anchorage cover to the seat cushion until it
is flat.
3. If the child restraint system makes
contact with the head restraint of the rear
seating position where the child restraint
system is to be installed, perform the
following procedure.
– Except rear center seat: Remove
the head restraint.
– Rear center seat: Raise the head
restraint to the extended position. If the
child restraint system still makes con-
tact, remove the head restraint.
For details, refer to “Head Restraint
Adjustment” �P37.
CAUTION
Store the removed head restraint in
the trunk. Do not place the head
restraint in the passenger compart-
ment to prevent it from being thrown
around in the passenger compart-
ment in a sudden stop or a sharp
turn.
4. While following the instructions sup-
plied by the child restraint system manu-
facturer, connect the lower hooks onto the
lower anchorages located at “
” marks on
the bottom of the rear seatback. When the
hooks are connected, make sure the
adjacent seatbelts are not caught.
– CONTINUED –
Child Restraint Systems
65
1
Seat, Seatbelt and SRS Airbags
Loading ...
Loading ...
Loading ...