Loading ...
Loading ...
Loading ...
(222,1)
北米Model "A9020BE-B" EDITED: 2022/ 5/ 16
“AUTO” position, pushing the lever for-
ward turns the High Beam Assist is on.
Refer to “High Beam Assist Function”
�P220.
When the headlights are on high beam, the
high beam indicator light “
” on the
combination meter is also on.
& Headlight Flasher
s03ah03
CAUTION
Do not hold the lever in the flashing
position for more than just a few
seconds.
To flash the headlights, pull the lever
toward you and then release it. The high
beam will stay on for as long as you hold
the lever. The headlight flasher works even
though the lighting switch is in the off
position.
When the headlights are on high beam, the
high beam indicator light “
” on the
combination meter also illuminates.
& High Beam Assist Function
s03ah07
NOTE
. Do not overestimate the capacity of
the high beam assist function. The
driver always has the responsibility to
understand the surrounding situation,
to drive safely, and to change the
headlight mode manually if necessary.
. The factory setting (default setting)
for this function is set as “operational”.
This setting can be changed to OFF
(non-operation) at SUBARU dealers.
For more details, contact a SUBARU
dealer.
! Models with the EyeSight system
s03ah0707
NOTE
. The high beam assist function uti-
lizes the stereo camera installed at the
position of the upper side of wind-
shield.
. For details on how to handle the
stereo camera, refer to the Owner’s
Manual supplement for the EyeSight
system.
The high beam assist function automati-
cally changes the headlight from high
beam to low beam (or vice versa).
When all of the following conditions are
met, the headlight will change to high
beam.
. When the vehicle speed increases to or
above 20 mph (32 km/h).
. There is no preceding or oncoming
vehicle.
. The forward area of the vehicle is dark.
. The road does not have a sharp curve.
When any of the following conditions are
met, the headlight will change to low beam.
. When the vehicle speed decreases to
or below 10 mph (16 km/h).
. When the forward area of the vehicle is
bright.
. When there is a preceding or oncoming
vehicle.
. When the EyeSight system is malfunc-
tioning or is temporarily stopped.
Light Control Switch
220
Loading ...
Loading ...
Loading ...