Loading ...
Loading ...
Loading ...
(262,1)
北米Model "A9020BE-B" EDITED: 2022/ 5/ 16
NOTE
. If the air inlet selection icon and
/ in the climate control mode
indicator are flashing when you start
the engine, there might be a malfunc-
tion in the electrical system. We recom-
mend that you contact your SUBARU
dealer for inspection.
. The indicator light on the air inlet
selection icon may flash in the follow-
ing cases. However, this does not
indicate a malfunction.
– After the vehicle battery has been
disconnected and reconnected.
– When the vehicle battery voltage
is low.
. When outside air circulation is se-
lected, the system may automatically
adjust the air inlet setting depending on
such factors as the temperature
setting, the temperature inside the
vehicle, or conditions outside the ve-
hicle.
& To Turn Off the Climate Con-
trol System
s04aj07
To turn off the climate control system,
touch the climate control ON/OFF icon.
4-5. Front Seat Heater (If
Equipped)
s04al
The seat heater operates when the ignition
switch is in the “ON” position.
Select the seat heater temperature using
the following operation.
& Dual 7.0-Inch Display Models
s04al03
Temperature control screen
1) Driver’s seat heater selector icon
2) Driver’s seat heater indicator
3) Front passenger’s seat heater indicator
4) Front passenger’s seat heater selector
icon
1. Touch the seat heater indicator on the
temperature control screen.
2. Touch the driver’s seat heater selector
icon/front passenger’s seat heater selec-
tor icon.
Each time you touch the seat heater
selector icon, the mode will change as
follows.
HIGH:
3 indicator lights are illuminated.
MID:
2 indicator lights are illuminated.
LOW:
1 indicator light is illuminated.
OFF:
All indicator lights turn off.
Selecting HIGH mode will cause the seat
to heat up quicker.
Holding and releasing the seat heater icon
turns the seat heater OFF in any mode.
Front Seat Heater
260
Loading ...
Loading ...
Loading ...