Loading ...
Loading ...
Loading ...
(331,1)
北米Model "A9020BE-B" EDITED: 2022/ 5/ 16
. The vehicle is stopped on a steep
slope.
. The Auto Vehicle Hold function is
malfunctioning.
In such cases, the Auto Vehicle Hold light
will turn off and the electronic parking
brake indicator light will illuminate.
! Tips
s07ap030505
. When the electronic parking brake is
automatically applied with the vehicle kept
stopped by the Auto Vehicle Hold function,
release the electronic parking brake by
either of the following operations before
starting off. Then make sure that the
electronic parking brake indicator light is
off.
– Depress the accelerator pedal with
the driver’s seatbelt fastened and with
the doors closed.
– Press the electronic parking brake
switch with the brake pedal depressed.
. Under certain conditions, including a
malfunction of the Auto Vehicle Hold, a
warning buzzer will sound and a warning
message will appear on the combination
meter display (color LCD). All warning
messages should be strictly observed.
. On a steep slope, the vehicle cannot be
kept stopped by the Auto Vehicle Hold
function. In such a case, depress and hold
the brake pedal.
. When stopping on a steep slope with
the Auto Vehicle Hold function activated,
the electronic parking brake may be
automatically applied after stopping, then
the electronic parking brake indicator light
may flash. In such a case, depress and
hold the brake pedal while stopped.
Otherwise, the vehicle may move. When
getting out of the vehicle, stop the vehicle
on a flat surface, then apply the electronic
parking brake.
. If the Auto Vehicle Hold indicator light
does not illuminates even after touching
“Auto Vehicle Hold (AVH)” with the operat-
ing conditions met, the function may have
a malfunction. Contact your SUBARU
dealer for an inspection.
. You may hear a sound while the Auto
Vehicle Hold function is keeping your
vehicle stopped. This is normal, and does
not represent a malfunction.
. When you depress the brake pedal to
release the Auto Vehicle Hold function, an
operation sound or vibration may be
generated, or the brake pedal may return
slowly. This is not a malfunction.
. While the vehicle is kept stopped by the
Auto Vehicle Hold function, the brake
pedal may feel stiff. However, this is not a
malfunction.
. When using the Auto Vehicle Hold
function, depress the brake pedal firmly.
Otherwise, the Auto Vehicle Hold may not
operate.
! Emergency brake
s07ap0303
CAUTION
Use the emergency brake only in
case of an emergency. If the emer-
gency brake is excessively used, the
brake parts will wear down faster or
the brake may not work sufficiently
due to brake overheating.
NOTE
. While using the emergency brake,
the electronic parking brake indicator
light and the indicator light on the
parking brake switch illuminate and a
chirp sounds.
. While using the emergency brake, a
sound may be heard from the engine
compartment. This is the operating
sound of the brake that is activated by
the Vehicle Dynamics Control system,
and does not indicate a malfunction.
If the foot brake has a malfunction, you can
stop the vehicle by pulling the parking
brake switch continuously.
– CONTINUED –
Parking Your Vehicle
329
7
Starting and Operating
Loading ...
Loading ...
Loading ...