Loading ...
Loading ...
Loading ...
(37,1)
北米Model "A9020BE-B" EDITED: 2022/ 5/ 16
ble in the following ways.
! Head restraint height adjustment
s01aa0401
1) Head restraint
2) Release button
3) Remove button
To release:
. Lowermost to the 1st step
Pull the head restraint up to the 1st step.
To raise:
. 1st step to the 3rd step
Pull the head restraint up while pressing
the release button on the top of the
seatback.
To lower:
Push the head restraint down while press-
ing the release button on the top of the
seatback.
To remove:
Use a key or other hard, pointed object to
press the remove button, then pull out the
head restraint.
To install:
Push the head restraint into the holes on
the top of the seatback until it locks.
Each head restraint should be adjusted so
that the center of the head restraint is
closest to the top of the occupant’s ears.
NOTE
It is not possible to remove or install the
head restraint without reclining the
front seatback. Reclining the front seat-
back and then remove or install the
head restraint.
! Head restraint angle adjustment
s01aa0402
The angle of the head restraint can be
adjusted in several steps. While maintain-
ing a suitable driving posture, adjust the
head restraint to a position where the back
of your head is as close to the head
restraint as possible.
To tilt:
Tilt the head restraint by hand to the
preferred position. A click will be audible
when the head restraint is locked.
To return:
Tilt the head restraint once as far forward
as it can go. The head restraint will
automatically return to the fully upright
position. Then, adjust the head restraint
again to the preferred angle.
Front Seats
35
1
Seat, Seatbelt and SRS Airbags
Loading ...
Loading ...
Loading ...