Loading ...
Loading ...
Loading ...
(401,1)
北米Model "A9020BE-B" EDITED: 2022/ 5/ 16
threaded hole until the threads can no
longer be seen.
4. Tighten the towing hook securely using
the jack handle.
After towing, remove the towing hook from
the vehicle and stow it in the under-floor
storage compartment.
Fit the towing hook cover on the bumper.
WARNING
. Do not use the towing hook for
purposes other than towing your
vehicle.
. Be sure to remove the towing
hook after towing. Leaving the
towing hook mounted on the
vehicle could interfere with prop-
er operation of the SRS airbag
system in a frontal collision.
CAUTION
To prevent deformation to the bum-
per and the towing hook, do not
apply an excessive load to the tow-
ing hook.
Rear towing hook:
1. Take out the screwdriver, towing hook
and jack handle from the under-floor
storage compartment.
2. Cover the tip of a flat-head screwdriver
with vinyl tape or cloth so that it will not
scratch the bumper. Insert the flat-head
screwdriver into the cutout of the cover and
pry open the cover.
3. Screw the towing hook into the
threaded hole until its thread can no longer
be seen.
4. Tighten the towing hook securely using
the jack handle.
– CONTINUED –
Towing
399
9
In Case of Emergency
Loading ...
Loading ...
Loading ...