Loading ...
Loading ...
Loading ...
(63,1)
北米Model "A9020BE-B" EDITED: 2022/ 5/ 16
perform the following procedure.
– Except rear center seat: Remove
the head restraint.
– Rear center seat: Raise the head
restraint to the extended position. If the
booster seat still makes contact, re-
move the head restraint.
For details, refer to “Head Restraint
Adjustment” �P37
CAUTION
Store the removed head restraint in
the trunk. Do not place the head
restraint in the passenger compart-
ment to prevent it from being thrown
around in the passenger compart-
ment in a sudden stop or a sharp
turn
For booster cushion:
Raise the head restraint to the extended
position (center seat). Do not remove the
head restraint.
2. Place the booster seat/cushion in the
rear seating position and sit the child on it.
The child should sit well back on the
booster seat/cushion.
3. Run the lap and shoulder belt through
or around the booster seat/cushion and
the child following the instructions pro-
vided by its manufacturer. For booster
seat/cushion with a belt guide, use the
seatbelt through the belt guide.
4. Insert the tongue plate into the buckle
until you hear a click. Take care not to twist
the seatbelt.
Make sure the shoulder belt is positioned
across the center of child’s shoulder and
that the lap belt is positioned as low as
possible on the child’s hips.
5. To remove the booster seat/cushion,
press the release button on the seatbelt
buckle and allow the belt to retract.
WARNING
. Never use a belt that is twisted or
reversed. In an accident, this can
increase the risk or severity of
injury to the child.
. Never place the shoulder belt
under the child’s arm or behind
the child’s back. If an accident
occurs, this can increase the risk
or severity of injury to the child.
. The seatbelt should fit snugly in
order to provide full restraint.
Loose fitting belts are not as
– CONTINUED –
Child Restraint Systems
61
1
Seat, Seatbelt and SRS Airbags
Loading ...
Loading ...
Loading ...