Loading ...
Loading ...
Loading ...
(187,1)
北米Model "A9020BE-B" EDITED: 2022/ 5/ 16
Items
Page for
11.6-inch
display
models
Page for
dual 7.0-
inch display
models
Interruption
screen
185
Vehicle status and
maintenance in-
formation
187 208
Vehicle settings 191 203/206
Climate control
operations
191 203
Rear view camera 334
Navigation system
Refer to the navigation/
audio Owner’s Manual.
Audio/telephone
Refer to the navigation/
audio Owner’s Manual.
EyeSight
Refer to the Owner’s
Manual supplement for
the EyeSight system.
The center information display can also be
used to set and initialize the center
information display itself.
NOTE
. When the vehicle is in motion,
certain functions and selections may
not be available.
. The language and units for both the
center information display and the
combination meter display (color LCD)
can be changed. For details, refer to
“General settings” �P191 (11.6-inch
display models) or “General settings”
�P203 (dual 7.0-inch display models).
. The images displayed in this Own-
er’s Manual are sample images. The
actual image may vary depending on
the region and vehicle specifications.
& Welcome Screen
s03bs02
Welcome screen and Good-bye screen
are motion graphic displayed on the
combination meter display and center
information display upon entering and
exiting the vehicle.
When the driver’s door is opened and
closed, the welcome screen will appear for
a short time.
NOTE
. The welcome screen will disappear
when the ignition switch is turned to the
“ON” position while the welcome
screen is shown.
. The welcome screen can be turned
on or off. For details, refer to “General
settings” �P191 (11.6-inch display
models) or “General settings” �P203
(dual 7.0-inch display models).
. For a certain period of time after the
welcome screen has once appeared, it
may not appear again even when the
driver’s door is opened and closed.
This does not indicate a malfunction.
& Good-Bye Screen
s03bs08
The good-bye screen will be displayed
under the following conditions.
. The driver’s door is opened after the
ignition switch is put in the “OFF” position.
. 3 minutes have passed after the ignition
switch is put in the “OFF” position with the
driver’s door closed.
. 10 minutes have passed when the
hands-free phone is used after the ignition
switch is put in the “OFF” position.
. The battery voltage is low when the
ignition switch is put in the “OFF” position.
& Interruption Screen
s03bs03
Useful messages, such as reminders,
weather information (if equipped) and
traffic information (if equipped) may inter-
rupt the current screen and appear on the
display accompanied by a beep. Take the
proper action according to the message.
– CONTINUED –
Center Information Display (CID)
185
3
Instruments and Controls
Loading ...
Loading ...
Loading ...