Loading ...
Loading ...
Loading ...
Connecting Cable TV
To connect to a cable TV system, follow the instructions below.
Cable without a Cable Box
1. Plug the incoming cable into the ANT 2 IN (CABLE) terminal on the back of the TV.
_-_ Becausethis TV is cable-ready,youdo not needa cableboxto viewunscrambledcablechannels.
Connecting to a Cable Box that Descrambles All Channels
Find the cable that is connected to the ANT OUT terminal on your cable box.
_-_ This terminalmightbe labeled"ANTOUT","VHFOUT"or simply,"OUT".
Connect the other end of this cable to the ANT 2 IN (CABLE) terminal on the back of the
TV.
Connecting to a Cable Box that Descrambles Sonle Channels
If your cable box descrambles only some channels (such as premium channels), fbllow the instructions below. You will need a two way
splitter, an RF (A/B) switch, and four lengths of Antenna cable. (These items are available at most electronics stores.)
•
Incoming
cable
Splitter
...........
cable Splitter _ _ L l
Cable Box
1. Find and disconnect the cable that is
connected to the ANT IN terminal on your
cable box.
Thisterminalmight be labeled"ANTIN", "VHF
IN"or simply,"IN".
2. Connect this cable to a two-way splitter.
3, Connect an Antenna cable between an
OUTPUT terminal on the splitter and the IN
terminal on the cable box.
Incoming i c,_ c,,! J
cable Splitter RF (A/e)
Cable Box Switch
4. Connect an Antenna cable between the
ANT OUT terminal on the cable box and the
B-IN terminal on the RF(A/B) switch.
Incoming
cable
-
S litter (A/e)
Cable Box Switch
S. Connect another cable between the other
OUT terminal on the splitter and the A-IN
terminal on the RF (A/B) switch.
__ N-_NI_' ......... _, 2_g-N_x[- WA_NRear6. Connect the last Antenna cable betweentheon
/I _ i. OUT terminal on the RF (A/B) switch and
_W _W_ the ANT 2 IN (CABLE) terminal the back
of the TV.
I .... Splitter L RF (A/e) (CABLE)
Cable Box Switch
After youhave madethis connection,set theA/B switch to the "A" positionfor normalviewing.Set the A/B switchto the "B" position to view
scrambledchannels. (Whenyou set the A/Bswitch to "B", youwill needto tune your TV to the cable box'eoutput channel,which is usually
channel 3 or 4.)
English-9
Loading ...
Loading ...
Loading ...