Loading ...
Loading ...
Loading ...
If you want to reset this feature...
1, Press the MENU button to display the menu.
Press the A or Y button to select "Setup", then press the ENTER button.
2, Press the ENTER button to select "Plug & Play".
For further details on setting up options, refer to the pages 13-14.
Plug & Play can only be accessed in the TV mode.
Changing Channels
Using the Channel Buttons
VOL
e o • rc
l,
Press the CH/", or CH v button to change channels.
:_ When you press the CH/X or CH V button, the TV changes channels in sequence.
You will see all the channels that the TV has memorized. (The TV must have
memorized at least three channels). You will not see channels that were either erased
or not memorized. See page 17 to memorize channels.
Usin_ the Number Buttons
Use the number buttons to quickly tune to any channel.
1, Press the number buttons to go directly to a channel.
For example, to select channel 27, press "2," then "7."
The TV will change channels when you press the second number.
Using the "-" Button
The .... button is used to select channels that broadcast a digital signal.
1, For example, for channel 7 (digital), press "7", then "-", then "1".
HD indicates the TV is receiving a digital High Definition signal. SD indicates the
TV is receiving an analog Standard Definition signal.
Using the PRE-CH Button to select the Previous Channel
l, Press the PRE-CH button.
The TV will switch to the last channel viewed.
To quickly switch between two channels that are far apart, tune to one channel, then
use the number button to select the second channel. Then use the PRE-CH button to
quickly alternate between them.
English- 15
Loading ...
Loading ...
Loading ...