Loading ...
Loading ...
Loading ...
Checking the Digital-Signal Strength
Unlike analog channels, which can vary in reception quality from "snowy" to clear, digital (HDTV) channels have either perfect
reception quality or you will not receive them at all. So, unlike analog channels, you cannot fine tune a digital channel. You can,
however, adjust your antenna to improve the reception of available digital channels.
1=
2,
Press the MENU button to display the menu.
Press the • or • button to select "Channel", then press the ENTER button.
Press the • or • button to select "Signal Strength", then press the ENTER
button.
If the signal strength meter indicates that the signal is weak, physically adjust
your antenna to increase the signal strength.
Continue to adjust the antenna until you find the best position with the strongest
signal.
Press the EXIT button to exit
You canalso press the S.STRENGTH button on the remotecontrol to checktheRMODE SMODE S STRENGTH
.... M_ signal strength
A_OG_L _ _ ,
............; { rSI
Using the R.Surf Feature
This feature alk)ws you to set the TV to return to a particular channel after a certain amount of time. For example, you may be
watching a channel when commercials start. You can set the R.Surf to "5 minutes", then switch channels. After 5 minutes, the TV will
return to the original channel. To use the R.Surf feature:
CAPTIONo oINFO
1, While you are watching the channel to which you want to return, press the
R.SURF button. The "Surf Off' is displayed.
2, Press the R.SURF button again to set the timer in thirty second intervals, up to
five minutes.
_-- Thetimewill startdecreasingwhileyouare settingupthe timer,andwill resetafter5
minuteshas passedoryouturn itoff.
3, The time you set will begin counting down on the screen. When the time runs
out, the TV will return to the channel you were watching when you set the timer.
English-34
Loading ...
Loading ...
Loading ...