Hestan AGPO33-NG Campania 33" Steeletto Natural Gas Pizza Oven AGPO33NG

User Manual - Page 21

For AGPO33-NG.

PDF File Manual, 56 pages, Read Online | Download pdf file

Loading ...
Loading ...
Loading ...
EN
©2021 Hestan Commercial Corporation
19
LIGHTING INSTRUCTIONS
The Pizza Oven features a battery powered spark-ignition system with a standing pilot to light the
main burner. The Oven is equipped with a safety valve similar to the rotisserie burner on your grill. It
will shut off the flow of gas if the pilot flame or main burner goes out.
The Pizza Oven can also be manually lit should that become necessary.
LIGHTING THE PIZZA OVEN
1. Read this Use & Care Manual before lighting.
REMOVE THE FRONT COVER DURING OPERATION.
Remove any items from inside the oven.
2. STAND AS FAR AWAY AS POSSIBLE WHEN LIGHTING - KEEP YOUR
FACE AND BODY FAR AWAY!
3. Push and turn the knob left to the “PILOT” position. Continue to push
in the knob while pressing the spark igniter button. The pilot flame
will light. Continue to push in the knob for at least 20-30 seconds after
lighting. Release the knob, the pilot flame should stay on.
4. Turn the knob left to the “ON” position, which will light the main burner.
5. If burner does not stay lit, or goes out during operation, turn knob to
“OFF” and wait 5 minutes before re-lighting.
6. Repeat the steps above to re-light the pilot until it stays on after releasing
the knob.
7. If the igniter does not work, check the battery as described on the
previous page, or see below for match lighting instructions.
NOTE: At the first start-up of the appliance, and after long periods of non-
use, there may be a delay in gas flow to the burner as the system is purged of
air in the gas lines.
MATCH LIGHTING INSTRUCTIONS
If a burner will not light with the spark igniter, it can be lit with a match. WHEN ATTEMPTING TO
LIGHT A BURNER WITH A MATCH, KEEP YOUR FACE AS FAR AWAY AS POSSIBLE. Use a long
fireplace match or a hand-held butane log-lighter to light the pilot flame. Hold the match close to the
pilot and follow the same instructions above to light the pilot. Once the pilot stays lit, turn the knob
to the full “ON” position to light the main burner.
If the pilot flame does not light in 5-8 seconds, turn the control knob to “OFF” and wait 5 minutes
before trying again. If the pilot will not light after several attempts, see the TROUBLESHOOTING
section of this manual.
OFF POSITION
PILOT POSITION
ON POSITION
REMOVE
THIS COVER
Loading ...
Loading ...
Loading ...