Loading ...
Loading ...
Loading ...
EN
©2021 Hestan Commercial Corporation
15
GAS AND ELECTRICAL CONNECTIONS
(cont.)
GAS CONNECTION - LIQUID PROPANE (LP) CYLINDER
The Hestan Pizza Oven can be connected to a standard 20 lb. [9.1 kg] LP gas cylinder when used with a
regulator/hose assembly and tank retention device available for purchase as kit AGCKLPT from Hestan.
This regulator/hose assembly must be used WITHOUT alteration. If the hose or any part of the
assembly is damaged, it should not be repaired - it needs to be replaced. Please contact your Hestan
dealer for genuine replacement regulator P/N 014309. Please read and understand the instructions
supplied with the kit, and perform the leak testing described below before using your appliance.
NOTE: NOTE: To ensure proper
heating performance
of this appliance,
verify that the supply
pressure is adequate to
maintain 10.0” WC [2.49
kPa] outlet (manifold)
pressure.
SAFE USE AND MAINTENANCE OF LP GAS CYLINDERS
READ AND FOLLOW ALL WARNINGS PROVIDED WITH THE LP GAS CYLINDER.READ AND FOLLOW ALL WARNINGS PROVIDED WITH THE LP GAS CYLINDER.
When operating this appliance with a LP gas cylinder, these instructions and warnings MUST be
observed. FAILURE TO DO SO MAY RESULT IN A SERIOUS FIRE OR EXPLOSION.
CYLINDER/CONNECTOR REQUIREMENTSCYLINDER/CONNECTOR REQUIREMENTS
1. LP gas cylinders, valves, and hoses must be maintained in good condition and must be replaced if
there is visible damage to either the cylinder or valve. If the hose is cut or shows excessive abrasion
or wear, it must be replaced before using the gas appliance (see 5). Contact your Hestan dealer for
genuine replacement regulator P/N 014309.
2. This unit, when used with a cylinder, should be connected to a standard 5-gallon (20 lb.) LP gas
cylinder equipped with an OPD (Overfill Prevention Device). The OPD has been required on all
cylinders sold since October 1, 1998, to prevent overfilling.
3. Cylinder dimensions should be approximately 12.25” [31 cm] in diameter and 18.25” [47 cm] high.
Cylinders must be constructed and marked in accordance with the Specifications for Propane Gas
Cylinders of the U.S. Department of Transportation (D.O.T.) or the National Standard of Canada,
CAN/CSA-B339, Cylinders, Spheres, and Tubes for Transportation of Dangerous Goods.
4. The cylinder used must include a collar to protect the cylinder valve, and the cylinder supply system
must be arranged for vapor withdrawal.
LP TANK RETENTION
DEVICE - SECURED TO
FLOOR OF ENCLOSURE
LP REGULATOR
/ HOSE ASSY.
3/8” ID FLEX HOSE w/ FLARE FITTINGS
1/2” NPT FIXED PIPE*
& FITTINGS
(CUSTOMER SUPPLIED)
20 LB. LP TANK
(CUSTOMER
SUPPLIED)
ADAPTER, 3/8” FLARE
X 1/2” NPT FEMALE
ISLAND FRONT CUTAWAY VIEW
PORTABLE LP CONNECTION
CAMPANIA PIZZA OVEN - AGPO33
UPPER VENT
OPENING
20 in² [129 cm²]
TOTAL AREA
BOTH SIDES
AND REAR
5 [12.7]
5 [12.7]
MAX
LOWER VENT
OPENING
10 in² [64.5 cm²]
TOTAL AREA
BOTH SIDES
AND REAR
1 [2.5]
MAX
PIPE MUST BE FIXED
TO THE STRUCTURE.
*
DIMENSIONS IN [ ] ARE IN CM.
PORTABLE LP CYLINDER
CONNECTION AND ORIENTATION
Loading ...
Loading ...
Loading ...