Loading ...
Loading ...
Loading ...
How to Set Oven for Cleaning
Quick Reminder:
1.
Prepare the oven for cleaning.
2. Close the oven
door
completely.
3. Press the CLEAN pad.
4. Press the INCREASE/DECREASE pad until
the desired Clean Time appears.
5. Press the START pad.
If the oven is too hot and
you
start
to
set a clean
cvcle.
the word “OFF” will
app~ar
in the display. Allow-
additional time for
coolin&
before you try to
set the cycle.
1.
Follow directions to prepare the oven for cleaning.
m
2.
Press the CLEAN pad.
3.
Press the INCREASE/DECREASE
pad until the desired Clean Time is
displayed in the lower left display.
Clean Time is normally
3
hours. You
can change the Clean Time to
anywhere between 2 and 4 hours,
depending on how dirty your oven is.
n
4. Press the START pad.
START
The lower right display shows the calculated Stop
Time. “LOCKED” flashes in the display while the
door locks automatically, then it appears steadily. It
will not be possible to open the oven door until the
temperature drops below the lock temperature and the
LOCK light goes off.
5. When the LOCK light is off, open the door.
NOTE:
Both the lower oven fan and the microwave
fan may operate during the self-clean function and
continue to
ouerate
until the oven temperature has
cooled. This
is
normal,
and
the fans
m-ay
continue
to run even after the oven is turned off.
To Stop a Clean Cycle
n
1.
Press the CLEAWOFF pad.
2. Wait until the oven has cooled below locking
CLEAR
temperature. You will not be able to open the
OFF
door right away unless the oven temperature is
at a safe level.
(continued next page)
31
Loading ...
Loading ...
Loading ...