Loading ...
Loading ...
Loading ...
80
Recording Stills
1. Turn the DVD camera/recorder on and
set the RECORDING MODE switch to
.
2. Make sure that appears on the
monitor screen.
Tip:
•
When switched to still recording, the image in
the viewfinder or on the LCD screen will be
rougher than during movie recording, but this
will not affect the recorded image.
3. Check the subject on the screen (viewfinder or LCD), and operate
the Zoom lever as needed to adjust the size of subject image.
The zoom operation is the same as when recording a movie. See “Zooming” on
page 65. You can also switch off digital zoom (see p. 66).
4. Press the PHOTO button (shutter) half way:
The operating sound will be heard twice.
The DVD camera/recorder automatically focuses
on the subject at the center of screen (when auto
focus is selected).
5. Press the PHOTO button all the way in.
The screen will dim once( DVD will blink), and
then the recorded still will be displayed.
6. When message "DISC ACCESS" disap-
pears, recording of still will be complete.
It will take approximately 10 seconds to store the data of one recorded still,
after which another still is recordable.
Still recording mode
Number of recordable stills
E-P54-88 01.1.29, 3:05 PMPage 80 AdobePageMaker6.5J/PPC
Downloaded from www.ManualsFile.com manuals search engine
Loading ...
Loading ...
Loading ...