Loading ...
Loading ...
Loading ...
21
ACCESS
Cautions When Using
Be careful when removing the DVD-RAM disc:
When the DVD camera/recorder is used for a long period of time, the temperature
of DVD-RAM disc will be high: Wait for a few moments before removing the disc
after the DVD camera/recorder is turned off.
Do not turn the DVD camera/recorder off while the ACCESS indicator is
blinking:
The ACCESS indicator is blinking to show that data
is being written to DVD-RAM disc, or being read from
it. Do not do any of the following so as not to dam-
age the data:
• Remove battery pack.
• Disconnect AC adapter/charger.
• Plug or unplug PC connection cable.
• Remove DVD-RAM disc.
If the DVD camera/recorder is turned off while the
ACCESS indicator is blinking, turn it on again with
the disc cartridge loaded in the DVD camera/recorder.
Do not wipe the DVD camera/recorder case with benzene or thinner:
• The coating of case could peel off or the case could deteriorate.
• When using chemical cleaning cloth, follow the instructions.
Also read the instructions attached with optional accessories:
For optional accessories, follow the cautions and instruction manuals attached.
Use the AC adapter/charger only in a well-ventilated, open space:
Do not use the AC adapter/charger in a narrow space where flow of air is blocked, or
where it is very near any object or inside any object: Ignoring this will increase heat
inside the AC adapter/charger, which could cause fire, burns, electric shock or fault.
E-P14-36 01.1.29, 1:45 PMPage 21 AdobePageMaker6.5J/PPC
Downloaded from www.ManualsFile.com manuals search engine
Loading ...
Loading ...
Loading ...