Loading ...
Loading ...
Loading ...
"Door" appears in the
display (on models with
_ii_i_i_III I__ iiiiiiiiiii
i_ ii_ iiiiiiiiiiiiiiii
Possible Causes
Self-cleaning cycle has been
selected but the latch handle
was not moved all the way
to the right.
Latch handle was moved to
the right but a program other
than self-cleaning was selected.
What ToDo
* Move the latch handle all the way to the right.
* Move the latch handle to the right only when setting
the self:cleaning cycle.
Display goes blank A fuse in your home may be * Replace tim fllse or reset the circuit breaker.
blown or the circuit
breaker tripped.
The clock is in the • See the Special features of your oven control section.
black-out mode.
Display flashes Power failure. * Reset the clock.
Unable to get the Oven control pads were * The BAKE and BROILHI/LO pads must be pressed at
display to show "SF" not pressed properly, the same time and held for 3 seconds.
Power outage, Power outage or surge. * Reset the clock. If the oven was in use, you must reset
it by pressing the CLEAR/OFFpad, setting the clock
and resetting any cooking traction.
"Burning" or "oily" This is normal in a new oven * To speed the process, set a self:clean cycle for a
odor emitting from and will disappear in time. lninimum of 3 hours. See the Using the self-
the vent cleaning oven section.
Strong odor An odor from the insulation * This is telnporaly.
around the inside of the oven
is normal for the first few times
the oven is used.
Fan noise A cooling fan may * This is normal. The cooling fan will mrn off and on.
automatically turn on and
off to cool internal parts.
Drawer does not slide The drawer is out of alignment. * Fully extend the drawer and push it all the way in.
smoothlyor drags See the Care and cleaning of the range section.
Drawer is over-loaded or load * Reduce weight. Redistribute drawer contents.
is unbalanced.
Warming drawer will A fuse in your home may be • Replace the fllse or reset the circuit breaker.
not work blown or the circuit breaker
tripped.
The oven is self-cleaning. * Wait for the self:clean cycle to finish and the oven
to cool.
Controls improperly set. • See the Electric warming drawer section.
Excessive condensation Liquid in warming drawer. * Remove liquid.
in the warmingdrawer
Uncovered foods. • Cover fop(1 with lid or aluminum foil.
Temperature setting too high. * Reduce telnperamre setting.
Food dries out in the Moisture escaping. * Cover foo(1 with lid or aluminum foil.
warmingdrawer
47
Loading ...
Loading ...
Loading ...