Loading ...
Loading ...
Loading ...
Careandcleaningoftherange(cont.).
Grate
Burnercap
Sealed Burner Assemblies (onsomemodels)
Turn all controls OFF befbre removing the
burner parts anti drip pans (ifso equipped).
The burner grates, caps, burner heads anti
drip pans (if so equipped) can be lifted ore
making them easy to clean.
Drip pan(ons0mem0deis)
Burnerhead
AkCAUTION:Do not operate the
burner without all burner parts and
drip pans (if so equipped) in place.
\ '_Electrode
Tile electrode of the spark igniter is
exposed when the burner head is
relnoved. When one burner is turned
to UTE, all the burners spark. Do not
attempt to disassemble or clean
around any burner while another
burner is on. An electric shock m W
result, which could cause you m knock
over hot cookware.
Use a sewing needle or twist-tie to
unclog the small hole in the burner
head.
After cleaning, make sure the slot
in the burner head is positioned
over the electrode.
Burner Heads (on sealed burners only)
NOTE:Beforeremovingtheburnerheadsand
caps,remembertheirsizeandlocation.Replace
theminthesamelocationafierc/eaning.
For proper ignition, make sure file small
hole in tile section fllat fit_sover tile
electrode is kept open. A sewing needle or
wire twist-tie works well to unclog it.
Theslitsin theburnerheadsof yourrangemustbe
keptdeanat all timesforan even,unhampered
flame.
You should clean tile surface burners
routinely, especially after bad spillovers,
which could clog these openings.
To relnove burned-on fbod, soak tile
burner heads in a solution of mild liquid
detergent and hot water for 20-30 lninutes.
For lnore stnbbom stains, use a toothbrush.
Befbre putting tile burner head back, shake
out excess water anti then d U it thoroughly
by setting it in a wann oven fbr 30 minutes.
Replace file burner heads and caps. Make
sure fllat file heads anti caps are replaced in
the correct location. There is one small, 2
medium anti one lane head anti cap.
NOTE:Onsomemodelsthereare2 large,one
mediumandonesmallheadandcap.
Sma,
b Medium
Large
26
Burner Caps (on sealed burners only)
Lift offwhen cool. Wash burner caps in hot,
soapy water anti rinse with clean water. You
m W scour with a plastic scouting pad to
remove burned-on food particles.
Dpy flmm in a warm oven or with a cloth-
don't reassemble them wet. Replace file
burner caps.
Make sure that caps are replaced on file
cotr'ect size burner. There is one small, 2
medium anti one large cap.
NOTE:Onsomemodelsthereare2 large,one
mediumandonesmallheadandcap.
Loading ...
Loading ...
Loading ...