Loading ...
Loading ...
Loading ...
Installation of the range (cont.).
[] Electrical Connections (onsomemodels)
_-_ Usage Situations where Appliance
Power Cord will be Disconnected
Frequently.
Do not use an adapter plug in these siulations
because disconnecting of the power cord places
undue strain on the adapter and leads to eventual
f_dlure of the adapter ground terminal. The
customer should have the two-prong wall receptacle
replaced,_4th a three-prong (grounding) receptacle
by a qualified electrician before using the appliance.
The installation of appliances designed for mobile
home installation must conform with the
Manufimmred Home Construction and S_ffety
Standard, Title 24 CFR, Part 3%0 (fbmlerly the
Federal Standard for Mobile Home Construction
and Safety, Title 24, HUD, Part %0) or, when such
standard is not applicable, the Standard for
Manufimmred Home Installations, latest edition
(Manufactured Home Sites, Communities and Set-
Ups), ANSI A225.1, latest edition, or with local
codes. In Canada, mobile home installation must be
in accordance with the current CAN/CSA
Z240/MH Mobile Home Installation Code.
Electric Disconnect
Locate disconnect plug on the range back.
Pinch sides of connector and pull out of range
back.
Seal the Openings
Seal aW openings in fl_e wall behind the range and
in the floor under the range when hookups are
completed.
Check Ignition of Surface Burners
Operation of all cooktop and oven burners should
be checked alter the range and gas supply lines have
been careflflly checked fbr leaks.
ElectricIgnitionModels
Select a top burner knob and simultaneously push
in and turn to LITEposition. You will hear a clicking
sound indicating proper operation of the spark
module. Once the air has been purged fi'Oln the
supply lines, burners should light _4thin 4 seconds.
After burner lights, rotate knob out of the LITE
position. T U each burner in succession until all
burners have been checked.
4O
Loading ...
Loading ...
Loading ...