Loading ...
Loading ...
Loading ...
Installationoftherange.
Read these instructions completely and carefully.
BEFOREYOUBEGIN
Installation of this range must conform with local codes, or in the absence of local codes, with the
National Fuel Gas Code, ANSI Z223.1,latest edition. In Canada, installation must conform with the current
Natural Gas Installation Code, CAN/CGA-B149.1 or the current Propane Installation Code, CAN/CGA-
B149.2,and with local codes where applicable. This range has been design-certified by the American
Gas Association according to ANSI Z21.1, latest edition and Canadian Gas Association according to
CAN/CGA-1.1latest edition.
As with any appliance using gas and generating
heat, there are certain safety precautions you
should follow. You will find these precautions
in the Important Safety Information section in the
fiont of this manual. Read them carefully.
IMPORTAN7_Save these instructions for the local
electrical inspector's use.
NOTE TOINSTALLER:Leave these instructions
with the appliance after installation is completed.
NOTE TO CONSUMER:Keep this Owner's Manual
and Installation Instructions for future use.
NOTE: This appfiance must be properly grounded.
FORYOURSAFETY
Do not store or use combustible materials, gasoline or other flammable vapors and liquids in the vicinity
of this or any other appliance.
ff you smell gas:
_-_ Open windows.
[] Don't touch electrical switches.
[] Extinguish any open flame.
[] Immediately call your gas supplier.
TOOLSYOUWILLNEED
Phillips and fiat-blade screwdrivers
Pencil and ruler
Twopipe wrenches (one for backup)
IN" open-end or adjustable wrench
.....Nut drivers or wrenches: 3/16" and 1/4"
ADDITIONAL MATERIALS YOU MAY NEED:
iii!_!_!!Gas line shut-offvalve
Pipejoint sealant or UL-approved pipe thread
tape with Teflon* that resists action of natural
and LP gases
Flexible metal appliance connector (1/2" LD.)
A 5-foot length is recommended for ease of
installation but other lengths are acceptable.
Never use an old connector when installing a
new range.
Flare union adapter for connection to gas supply
line (3/4" or 1/2" NPTx 1/2" I.D.)
Flare union adapter for connection to pressure
regulator on range (1/2" NPTx 1/2" LD.)
32 *Teflon:RegisteredtrademarkofDuPont
Loading ...
Loading ...
Loading ...