Loading ...
Loading ...
Loading ...
Read these instructions completely and carefully.
[] Installing the Anti-Tip Device
WARNING:
Range must be secured _ith an approved
Anti-Tip device.
Unless properly installed, the range could be
tipped by you or a child standing, sitting or
leaning on an open door.
After installing the Anti-Tip device, veri_ _that
it is in place by carefillly attempting to tilt the
range fbtward.
This range has been designed to meet all
recognized indusuy tip standards for all
normal conditions.
The use of this device does not preclude
tipping of the range when not properly
installed.
If the Anti-Tip device supplied _4th the range
does not fit this application, use the universal
Anti-Tip device WB02X7909.
[] Mark the wall where the RIGHTEDGEof the
range is to be located. Be sure to allow for the
countertop overhang if you intend to install
the range next to cabinets.
Anti-Tip
device
Slottedheadscrew
Approx.20
Wallplate
Using file device as a template, mark file
position of file hole for the screw.
For wood construction, (kill a pilot hole at an
angle of 20 de_'ees fi'om the horizontal. A nail
or awl may be used ira drill is not available.
Mount file Anti-Tip device with file screw provided.
For cement or concrete construction, you
will need a l/4" x l '/_,"lag bolt and a l/2" O.D.
sleeve anchor, which are not provided. Drill
the recommended size hole for the hardware.
Wallboard
Anti-Tip
device
Backof range
Install the sleeve anchor into the (killed hole and
then install the lag bolt through the device. The
bolts must be properly tightened as recommended
for the hardware.
Slide d_e range against the wall, and check for
proper installation by _'asping dm fi'ont edge
of din cooktop and carefiflly attelnpting to tilt
the range fbtward.
2'_" / Markededgeof range
[_] Locate the outside edge of the device 2_A"
toward the center of the range fi'om the
marked edge of the range.
When All Hookups Are Completed'.
MAKESUREALLCONTROLSARELEFTIN THEOFF
POSITION.
MAKESURETHEFLOWOFCOMBUSTIONAND
VENTILATIONAIR TOTHERANGEIS UNOBSTRUCTED.
Converting to _P Gas (or converting back to natural gas from LP)
Thisrangeleavesthefactorysetfor usewithnaturalgas.If
youwantto convertto LPgas,theconversionmustbe
performedbya quafifiedLPgasinstaller.
The conversion instructions, sticker and LP orifices
can be found attached to the range next to the
pressure regulator.
There is a second set of instructions included in d_e
envelope containing the product wiring diagrams
on the back of the range. Keep these instructions
and dm orifices in case you want to convert back to
natural gas.
43
Loading ...
Loading ...
Loading ...