GE - General Electric JGBP86AEA3AA GE gas range

User Manual - Page 46

For JGBP86AEA3AA.

PDF File Manual, 56 pages, Download pdf file

Loading ...
Loading ...
Loading ...
Before YouCarl ForService (cont.)...
Troubleshooting -tips
Possible Causes What To Do
Oven willnot self-clean The oven temperature is too Allow the range to cool to roolll temperature and
high to set a self-clean operation, reset the controls.
Oven controls improperly set. " See the Using the self-cleaning oven section.
On models with a door latch, * Make sure you move the door latch handle all the
the oven door is not in the way to the right.
locked position.
"Crackling" or This is the sound of the * This is normal.
"popping" sound metal heating and cooling
during both the cooking and
cleaning functions.
Excessive smoking Excessive soil. * Press the CLEAR/OFF pad. Open the windows to
rid the room of smoke. Wait until the LOCKED DOOR
light goes off. Wipe up the excess soil and reset the
(;lean cycle.
Oven door will not open Oven too hot. * Allow the oven to cool below locking teznperamre.
after a clean cycle
Oven not clean after a Oven controls not properly set. See the Usingthe self-cleaningoven section.
clean cycle Oven was heavily soiled. * Clean up hea W spillovers before starting the clean
cycle. Heavily soiled ovens may need to self:clean
again or for a longer period of time.
"LOCKDOOR"flashes The self-clean cycle has been * Close the oven door.
in the display selected but the door is not
closed.
LOCKEDDOORlight
is on whenyou want
to cook
The oven door is locked
because the temperature
inside the oven has not
dropped below the
locking temperature.
Press the CLEAR/OFFpad. Allow the oven to cool,
and then, on models with a door latch, unlock
the door.
"T---and a number or On models with a door latch, * The latch may have been znoved, even if only slightly,
letter" flash in the display if a function error code appears fi'Oln the locked position. Make sure the latch is lnoved
during the self-cleaning cycle, to the fight as fro"as it will go.
check the oven door latch.
You have a function error code. * Press the CLEAR/OFFpad. Allow the oven to cool for one
hour. Put the oven back into operation.
If the function code repeats. . Disconnect all power to the range for 5 minutes
and then reconnect power. If the fimction error
code repeats, call for service.
Ovendoorwill not Oven is too hot.
unlock(onmodelswith
a doorlatch)
Allow the oven to cool below locking telnperamre.
Do not lock the door with the door latch except when
using the self:clean feature.
46
Loading ...
Loading ...
Loading ...