Loading ...
Loading ...
Loading ...
Cleaning and care
82
Cleaning the water intake filter
The washer-dryer has a filter to protect
the water intake valve. The filter at the
open end of the water inlet hose should
be checked approximately every
6months. Perform this check more of-
ten if there are frequent interruptions to
the external water supply.
First turn off the stopcock.
Unscrew the water inlet hose from the
stopcock.
Remove the rubber seal 1 from the
recess.
Hold the free end of the water inlet
hose upside down. The plastic filter 2
will fall out.
Clean the plastic filter.
Reassemble in reverse order.
Turn on the stopcock and check that
the connection is watertight. If water
drips out, tighten the connection.
Never forget to put the filter back in
place after cleaning.
Loading ...
Loading ...
Loading ...