Loading ...
Loading ...
Loading ...
Warning and Safety instructions
11
This washer-dryer must not be used in a non-stationary location
(e.g. on a ship).
Do not make any alterations to the washer-dryer, unless author-
ised to do so by Miele.
Temporary or permanent operation on an autonomous power sup-
ply system or a power supply system that is not synchronised with
the mains power supply (e.g. island networks, back-up systems) is
possible. A prerequisite for operation is that the power supply sys-
tem complies with the specifications of EN50160 or an equivalent
standard.
The function and operation of the protective measures provided in
the domestic electrical installation and in this Miele product must
also be maintained in isolated operation or in operation that is not
synchronised with the mains power supply, or these measures must
be replaced by equivalent measures in the installation. As described,
for example, in the current version of BS OHSAS 18001–2 ISO
45001.
The manufacturer’s warranty will be invalidated if the washer-dryer
is not repaired by a service technician authorised by Miele.
Correct use
Do not install the washer-dryer in a room where there is a risk of
frost. Frozen hoses may burst or split. The reliability of the electronic
control unit may be impaired at temperatures below freezing point.
Before using the machine for the first time, check that the transit
bars at the rear of the washer-dryer have been removed (see “Install-
ation - Removing the transit bars”). During spinning, a transit bar
which is still in place may result in damage to both the washer-dryer
and adjacent furniture or appliances.
Turn off the stopcock if the washer-dryer is to be left for any
length of time (e.g. holiday), especially if there is no floor drain (gully)
in the immediate vicinity.
Loading ...
Loading ...
Loading ...