Loading ...
Loading ...
Loading ...
WASHING
43
Final spin speed in wash programme
When a programme is selected, the op-
timum spin speed for this wash pro-
gramme is shown in the display.
A faster spin speed can be selected for
certain wash programmes.
The highest selectable spin speed is in-
dicated in the table.
Omitting the final spin (Rinse hold)
Select the Rinse hold Extra.
The laundry is not spun after the final
rinse cycle and remains in the rinse wa-
ter. This helps prevent creasing if the
laundry is not going to be removed from
the drum immediately after the end of
the programme.
To start the final spin:
The wash programme is set to the op-
timum spin speed. You can change the
spin speed.
Touch the Change spin speedsensor
control.
Select the desired spin speed.
Start the final spin with the Start/Stop
control.
Ending the programme:
Touch the Change spin speedsensor
control.
Select the spin speed 0 rpm (no
spin).
Touch the Start/Stopsensor control.
The water will be pumped away.
Rinse-spin
There is a spin cycle after the main
wash and between the rinse cycles. A
reduction in the final spin speed will
also reduce the rinse-spin speed as ap-
propriate.
Omitting the rinse-spin and the final
spin
Touch the Spin speedsensor control.
Select the spin speed 0 rpm (no
spin).
After the last rinse, the water will be
pumped away and the anti-crease
phase will switch on.
In some programmes an extra rinse is
introduced with this setting.
Loading ...
Loading ...
Loading ...