Loading ...
Loading ...
Loading ...
Before YouCallForService...
Troubleshooting -tips
Possible Causes
"F-- and a number You have a function
or letter" flash error code.
in the display If the fm_ction code repeats. " Disconnect all power to the o``en for at least 30
seconds and then reconnect power. If the flmction
error code repeats, call for ser``ice.
Displaygoes blank A fuse in your heine may • Replace the fllse or reset the circuit breaker.
be blown or the circuit
breaker tripped.
The clock is in the • See the Special features of your oven control section.
black-out mode.
Oisplayflashes Power failure. • Reset the clock.
Unableto getthe Oven control pads were • The BAKE and BROIL HI/LO pads (on d(mble (,``eta
displayto show "SF, not pressed properly, models use the upper (,,.eta controls) must be pressed
at the same time and held fi,r 3 seconds.
"Probe? appears in This is reminding you to • Enter a probe temperatm'e.
the display enter a probe temperature
after plugging in the probe.
Power outage, Power outage or surge. • Reset the ch)ck. If the (,``eta was in use ``'ou must reset
it by )ressing the CLEAR/OFF pad, ., I , settino the clock
and resetting an) cooking flmction.
steamfrom the vent When using the convection • This is normal.
feature, it is normal to see
steam coming out of the
oven vent. As the number
of shelves or amount of
food being cooked increases,
the mnount of visible steam
will increase.
What ToDo
• Press the CLEAR/OFFpad. _Mlow the (,``,eta to cool fi.r
one houri Put the (,``eta 1)ack into operation.
i/ iiii i_iii!_!_!_!_!_!_!_!_!_!_I
"Burning', or "oily," This is normal in a new oven • To speed the process, set a sel6clean cycle for a
odor emitting from and will disappear in time. minim mn of 3 hours. See the Using the self-cleaning
the vent oven section.
Strongodor
An odor from the insulation
around the inside of the
oven is normal for the first
few times the oven is used.
• This is temporar).
Fannoise
A cooling fan or a convection
fan (depending on the
function you are using)
may automatically turn on
and off to cool internal parts.
• This is normal. The cooling tim will ttu'n off and on.
The con``ection tim will ttm tmtil the flmction is
(,``er or the do(,r is opened.
32
Loading ...
Loading ...
Loading ...