Loading ...
Loading ...
Loading ...
0
m
0
0
w
• u
i_J_iiliYiii_iiiiiiiiii
i_i_=_4_,,,¸,
!!iiiii_iilIili
4_
0
0
Beforeyou call for service...
Troubleshooting Tips
Save time and money! Review the charts on the following
pages first and Sou mag not need to call for service.
if:: Possible Causes What To Do
Topburners do not light Plug on range is not completelg
or do not burn evenly inserted in the electrical outlet.
Burner hole or slits on the side
of the burner mag be clogged.
Improper burner assemble.
Burner flames very Improper air to gas ratio.
large or yellow
Clock does Plug on range is not completelg
not work inserted in the electrical outlet.
A fuse in gour home mag be
blown or the circuit breaker
tripped.
Oven controls improperlg set.
Surface burners light The oven gas shut-off valve
but oven does not mag have accidentallg been
moved during cleaning or
moving.
• Make sure electrical plug isplugged into a live,properly
grounded outlet.
• Removethe burner heads and caps and cleanthem
with a sewing needle or twist-tie. Makesure you do not
enlarge the holes.Checkand clean the electrode area for
burned-on food or grease.
• Make surethe burner parts are installed correctly,
Seethe Careand cleaningof the range section,
• If range isconnected to LPgas,contact the person who
installed your range or made the conversion.
• Make sure electrical plug isplugged into a live,properly
grounded outlet.
• Replacethe fuse or resetthe circuit breaken
• Seethe Using theoven section.
• Tocheck the oven gas shut-off valve,remove the broiler
drawer or kickpanel (seethe Careand cleaningof the
range section)and look for the gas shut-off leverat the
back of the range.
PULL TO OPE
Display goes blank A fuse in gour home mag be • Replacethe fuse or resetthe circuit breaken
blown or the circuit
breaker tripped.
Theclock isturned off so that it • Seethe Using theclockand timer section.
does not show in the displag.
Display flashes Powerfailure.
Unable to get the Oven control pads were
display to show !'sF!! not touched properlg.
• Resetthe clock.
• The Bake and Broil Hi/Lo pads must be touched at
the same time and held for 3 seconds,
42
Loading ...
Loading ...
Loading ...