Loading ...
Loading ...
Loading ...
26
TROUBLESHOOTING
B
1
2
3
4
C
D
A
E9 Low Fuel Detection Error
Cleaning Fuel Sensor Window
To clear the E9 error code from the controller, please follow these steps:
1. When the grill has completed the shutdown procedure and
completely cooled, from the rear of your SMOKEFIRE grill, set a large
bucket or container underneath the middle of the hopper (A).
2. Pull the hopper slide door located on the rear of the hopper to
release the pellets into the container below (B).
3. Using a dry cloth or paper towel, wipe the low fuel sensor window
until cleaned (C).
4. Push the hopper slide door closed (D), and refill the hopper with your
choice of WEBER SMOKEFIRE ALL NATURAL HARDWOOD PELLETS.
5. Power on the grill and begin a cook to allow the controller to run
diagnostics.
6. If the E9 error code still remains on the controller, Contact the
Customer Service Representative in your area using the contact
information on our website for low fuel sensor replacement.
Loading ...
Loading ...
Loading ...