Loading ...
Loading ...
Loading ...
21
TROUBLESHOOTING
F
G
H
I
J
K
weber.com
7. Remove the auger/motor assembly by first removing two screws and
washers from the mounting bracket (F). Carefully slide and twist the
auger/motor assembly out and away from the grill (G).
NOTE: Visually note the orientation of the motor when installed on the grill.
8. Clean the auger tube and auger/motor assembly to remove any pellets
and debris that may have been jamming the auger.
9. Before reinstalling the auger/motor assembly back into the auger tube,
verify that the shear pin is still intact (H). Both sides of the pin should be
fully engaged and visible. The auger should not pull away from the motor.
If the shear pin is broken, it should be replaced before reassembling.
Contact a WEBER Customer Service Representative in your area using
the contact information on our website for a replacement.
10. Reinstall the auger/motor assembly by sliding the auger through the
auger tube and fastening the assembly with two screws and washers (I).
CAUTION: Make sure the auger/motor assembly is in the correct orientation when
reinstalling into the auger tube. See illustration (J).
11. Connect the motor’s electrical connection. Make sure the connector is
securely joined to the motor (K).
Loading ...
Loading ...
Loading ...