Loading ...
Loading ...
Loading ...
!
118
"Auto sequential" mode
This mode enables you to overtake, for
example, while remaining in the auto-
mated mode, using the functions of the
sequential mode.
Operate the
+
or
-
positions of the
steering wheel controls.
The gearbox engages the required gear if
the engine speed permits.
AUTO
remains
displayed on the instrument panel.
After a few minutes without any action
on the controls, the gearbox resumes
automatic control of the gears.
Stopping the vehicle
Before switching off the engine, you can
change to position
N
to be in neutral.
In this case, it is imperative that you
apply the handbrake to immobilise the
vehicle.
Operating fault
With the ignition on, if this warn-
ing light comes on and
AUTO
flashes, accompanied by an au-
dible signal and a message on
the multifunction display, this indicates
a gearbox malfunction.
Contact a PEUGEOT dealer without
delay.
AUTO
and
appear on the
instrument panel display.
"Snow" automated mode
In the automated mode, if the vehi-
cle detects poor grip, the gearbox will
change automatically to the snow auto-
mated mode.
Reinitialisation
Following disconnection of the battery,
the gearbox must be reinitialised.
Switch on the ignition.
AUTO,
and
-
appear on the
instrument panel display.
Select position
N
.
Press the brake pedal.
Wait approximately 30 seconds until
N
or a gear appears on the instru-
ment panel display.
Release the brake pedal.
The gearbox is operational again.
Loading ...
Loading ...
Loading ...