Loading ...
Loading ...
Loading ...
Advanced use
75
En
Using Crossfader Start
If you want to use Crossfader Start, set the [CROSSFADER ASSIGN]
switch to [A] or [B], the channel you want to move.
1 Set the cue point.
Pause the track at the position you want to start playback from, then press the
[CUE] button on that deck.
• You can also set the cue point by moving the crossfader to the left edge or
the right edge while holding the [SHIFT] button during a pause.
2 Move the crossfader to the left edge or right edge.
If you want to use Crossfader Start to trigger playback on channel 2, set the
crossfader to the left edge, and vice versa.
3 Hold the [SHIFT] button and move the crossfader towards the
opposite edge from where it’s set.
Playback of the track starts from the cue point.
• If you hold the [SHIFT] button during playback and move the crossfader back
to the edge where you started from, the playback position instantly jumps
back to the cue point and pauses. (Back Cue)
When no cue point is set, playback starts from the beginning of the track.
When moving the crossfader from the left edge to right edge (or vice versa) and
holding the [SHIFT] button while triggering a cue, playback of the track starts
from the set cue point.
Loading ...
Loading ...
Loading ...