Loading ...
Loading ...
Loading ...
Water connection
86
Information on the fresh water
connection
The machine may only be connected
to the fresh water supply by qualified
technicians.
Disconnect the machine from the
power supply before connecting it to
the fresh water supply.
Turn off the water supply before
connecting the water supply line for
the ice cube maker.
The water quality must comply with
the requirements for drinking water in
the country in which the machine is
being operated.
WARNING! Connect to potable water
supply only.
Connection to the household water
supply must comply with the
applicable regulations in the country
in which the machine is being
installed.
All units and systems used to supply
water to the machine must also
comply with the applicable
regulations in the respective country.
The appliance is only suitable for
connection to a cold water supply,
which
– is directly connected to the water
supply in order to ensure a circulation
of the water in the cold water line.
Avoid using a water line in which the
water is allowed to pool. This can
affect the taste of water and ice
cubes.
– withstands the operating pressure.
– fulfills the hygiene regulations.
Water pressure on-site:
– Minimum: 21.76psi (1.5bar)
– Maximum: 87.02psi (6bar)
A shut-off valve must be provided
between the water line and the water
supply of the building to ensure that the
water supply can be cut off if
necessary.
Make sure that the shut-off valve is
still accessible after the appliance
has been installed.
Risk of damage!
If the water supply is cut off while the
ice cube maker is still in use the
water intake pipe can freeze up.
Turn the ice cube maker off if the
water supply is interrupted (e.g. while
on vacation).
Loading ...
Loading ...
Loading ...