Loading ...
Loading ...
Loading ...
Building in the appliance
110
Important for cabinetry with door
fittings (e.g., knobs, raised seals,
etc.):
The dimension of these must be taken
into account to ensure there is a gap
of15/8"(42mm) all round.
Pull the appliance forwards by the
appropriate dimension.
Check again to make sure there is a
gap of 15/8"(42mm) to the front
edges of the door fittings all round.
Tip: If possible, remove the door fittings
and push the appliance into the niche
until all fixing brackets at the top and
bottom are touching the front edge of
the cabinet unit side wall.
Align the appliance on both sides via
the adjustable feet using the wrench
supplied, so that it stands upright.
Securing the appliance in the
niche
Push the appliance onto the cabinet
wall on the hinge side.
To join the appliance to the cabinet,
screw fixing plate screws into the
top, middle and bottom of the lug of
the hinge.
Loading ...
Loading ...
Loading ...