Loading ...
Loading ...
Loading ...
Building in the appliance
116
Pre-drill fixing holes in the cabinet
door and fasten screws. Make sure
both metal edges are flush
(//symbol).
Close the appliance door and the
cabinet door.
- Adjusting the depth (Z)
Loosen screws at the top of the
appliance door and screw at the
bottom of the securing bracket. Push
on the appliance door until there is a
gap of 1/16" (2mm) between the
cabinet door and the cabinet carcase.
Tighten all the screws again.
Replace upper cover and click it
into place.
Push up side covers so that they
audibly click into place.
Loading ...
Loading ...
Loading ...