Loading ...
Loading ...
Loading ...
53
EN
Error Codes
Problem Possible Cause Solutions
Water inlet problem.
• Check for a clogged, kinked or frozen
water supply hose.
• Check water supply.
Drainage Problem.
• Check for a clogged, kinked or frozen
drain hose.
Waste spigot is clogged. • Remove knockout on waste spigot.
Filters are clogged. • Clean Filters.
Oversudsing caused by
improper detergent.
• Only use detergents which are designed
for use in dishwashers.
• To remove detergent residue in the tub,
pour approximately 100~200 mℓ of milk
into a shallow bowl, place it to the upper
rack and then run the appliance on the
Auto cycle.
Failure to level appliance.
• Make sure that the appliance is properly
leveled.
Excessive Water supplied.
• Call for service if the same problem
occurs again.
Water leakage problem.
Heater circuit failure.
Thermistor failure
Motor trouble
Vario motor trouble
Loading ...
Loading ...
Loading ...