Loading ...
Loading ...
Loading ...
23
EN
Control Panel
1
2
4
3
• Depending on the model, the logo and may be located either on the front of the appliance or
the top of the door.
Power
• Press Power button to turn power on and off.
• Briefly touch Power button to turn power on
and off.
• After the cycle is complete, the power
automatically turns off for purposes of safety
and economy.
• If there is a power surge, power outage, or
disruption of any kind, power is automatically
turned off for safety.
• When power is connected again, it will turn on
automatically and resume the cycle.
Display
•
: Digial Display
− The digital display on the control panel
shows the ESTIMATED cycle time. When
the cycle and options are selected, the
display shows the total estimated time to
complete those selections. During operation,
the display shows the remaining estimated
operating time.
− The estimated time shown on the display
does not include delay times for heating
water, etc.
− If Delay Start is selected, the display shows
the delay time in hours.
− The Auto cycle time may vary depending on
the soil level of your load.
•
: Rinse Aid Icon
− This icon illuminates when the rinse aid level
is low. The LED automatically shuts off when
the rinse aid is refilled or the level is set to
0.
1
2
• : Machine Clean Icon
− This icon flashes after every 30 cycles, and
while the Machine Clean cycle is running.
− To activate or deactivate the icon, press the
Intensive button for 3 seconds.
•
: Wi-Fi
− When the appliance is connected to the
internet through a home Wi-Fi network, this
icon illuminates.
•
: Salt refill Icon
− This icon illuminates when the salt level is
low. The LED automatically shuts off when
the salt is refilled.
Cancel
• The drain pump activates and the cycle
cancels. Once the appliance finishes draining,
the power turns off.
• Press and hold Start button for 3 seconds to
activate the cancel function.
Start
• To operate the appliance, close the door and
press Start button.
• If Start button is not pressed to start the cycle
within 4 minutes, the power will automatically
turn off.
Chime On/Off
• To activate or deactivate the button sounds,
press and hold Dual Zone and Energy Saver
simultaneously for 3 seconds. The error alert
sound cannot be turned off.
3
4
Loading ...
Loading ...
Loading ...