Loading ...
Loading ...
Loading ...
51
EN
Problem Possible Cause Solutions
Odor
The previous cycle was
stopped before completion
and residual water
remains in the appliance.
• Turn on the power, run the Cancel
cycle option to remove the residual
water, then run the Quick cycle using
detergent but with the appliance
empty.
There is food in the
bottom of the unit or in
the filter.
• Clean the filter and the interior
according to the Maintenance
section of the owner’s manual.
Unwashed dishes are left
in the unit for a long time.
• Cycle with one cup of white vinegar
in a appliance safe glass or bowl
placed on the upper rack. (Vinegar is
an acid, and with constant use it
could damage your appliance.)
Food soil remains on
dishes.
Improper cycle selection.
• Select correct cycle based on soil
level and type of dishware being
washed.
Water temperature is too
low.
• Check water supply connection or
water heater setting.
Dishwashing detergent
was not used.
• Use recommended detergent.
Low inlet water pressure.
• Water pressure should be between
20 and 80 psi.
Water jet holes on spray
arms blocked.
• Clean the spray arms.
Improper loading of
dishes.
• Make sure dishes do not block spray
arm rotation or interfere with
detergent dispenser.
Filters are clogged. • Clean filters.
Too much Unremoved
food debris on dishes.
• Large particles of food residues
should be removed from the dishes
before staring wash.
Loading ...
Loading ...
Loading ...