Loading ...
Loading ...
Loading ...
11
EN
Accessories (On Some Models)
Funnel
(All models)
Noise Strip
(Lower - 1EA / Front
- 1EA / Side - 2EA)
Cover Felt
Moisture Barrier Tape
(Aluminum Tape)
Preparing Cabinet Opening
Min. 600 mm
820 - 870 mm
100 mm
600 - 605 mm
75 mm
• Cut out for hoses and electrical cables on
either side. (Approximately 100 mm X 75 mm)
• Select a location as close to the sink as
possible for ease of connection to the water
and drain pipes.
• To ensure drainage, the appliance should not
be installed more than 1 meter away from the
sink.
• If the appliance is installed in a corner, allow
minimum clearance of at least 50 mm
between the appliance and an adjacent
cabinet or wall.
• Before sliding the appliance into the
installation opening, all necessary height and
height adjustments should be made using a
spanner.
CAUTION
• Any bare wood surrounding the appliance
should be sealed with a waterproof paint or
sealant to prevent it from swelling.
• Slide the dishwasher into the cabinet, opening
carefully. Make sure that the drain hose
behind the machine and inside the cabinet is
not kinked or stretched.
NOTE
• This installation must be conducted by
qualified service personnel to ensure it has
been installed correctly.
• Do not pull or lift the appliance using the
handle; dosing so can damage the door and
hinges. Open the door and grab the body
frame and the top front opening of the tub to
move or lift the appliance.
• Do not push the door of the dishwasher with
knees.
Loading ...
Loading ...
Loading ...