Loading ...
Loading ...
Loading ...
21
EN
CAUTION
• Rinse aid must not be added if dish washing
tablets are used which contain a built in rinse
aid.
• Wipe off any spilled rinse aid to prevent suds.
NOTE
• Only use liquid rinse aid in the appliance.
• Do not overfill the rinse aid dispenser.
• Too much or too little rinse aid can inhibit the
drying performance.
Setting the Rinse Aid Level
The dispenser has five adjustment levels. The
appliance is programmed at the factory for a
rinse aid dispenser level of 2. This can be
checked and altered by using the buttons on
the control panel.
1
Ensure the appliance is off.
2
Press Power and Dual Zone
simultaneously to check the current setting.
3
Press Delay Start to change the rinse aid
dispenser setting. Each press of the button
changes the setting one step from L0(off) to
L4.
4
Once the desired rinse aid dispenser setting
is selected, press Start to save.
CAUTION
• If the rinse aid lid is not closed properly, a
large amount of rinse aid will release into the
tub and cause washability problems.
NOTE
• The Rinse aid refill icon will illuminate
when more rinse aid is needed.
• If you notice cloudy spots, streaks or water
marks on the glassware after washing,
increase the setting level.
• Setting the control too high can cause
foaming, which will cause poor wash
performance.
• If the glass is smeared or foam is present on
the bottom, decrease the level setting.
• Setting the rinse aid control too low can cause
spotting and streaking on dishes and poor
drying performance.
Loading ...
Loading ...
Loading ...