Loading ...
Loading ...
Loading ...
41
Cabinet construction for built-in installation
For the best integration within a kitchen, install this
appliance in a cupboard that gives a flush fit with the
surrounding cupboard fronts. A recess of
20mm is ideal.
The appliance may also be mounted in a proud fit
configuration. This will push out the front of the product
from the cupboard front by 20mm.
NOTE 20mm slot at rear of oven in base.
Cleats to be a maximum of 100mm wide
Underbench installation
Your underbench oven looks best when the control panel
is directly under the benchtop. An upper infill panel may
be added if the cooktop placed above the benchtop is
too deep. *Refer to cooktop installation instructions for
required clearance between cooktop and oven.
Vertical cabinet installation
The oven can be built into a vertical cabinet in the same
manner as an underbench. The required cavity dimensions
are the same and the product is secured to the cabinet in
the same way.
INSTALLATION OF EVEP916SB
NOTE: If a powerpoint is fitted it must be accessible with the
appliance installed.
900mm
600mm
580mm
*Refer to cooktop installation instructions for required
clearance between cooktop and oven.
876mm
Mounting holes
20mm
slot
100mm
max
*20mm
see note
below
Loading ...
Loading ...
Loading ...