Loading ...
Loading ...
Loading ...
12 electrolux.com.au
USING THE OVEN
Cooking with the timer
Your oven is equipped with a programmable controller that
can be used to turn the oven on and off automatically. The
‘cook time’ controls are used to automatically turn the oven
off after a set amount of time. The ‘Delay End’ controls are
used to set the time of day that you want the cooking cycle
to finish at.
Setting the cook time
1. Select the desired oven function and
cooking temperature.
2. Touch the cook time
symbol as often as necessary
(or hold), until the desired cook time has been set.
3. Press ‘OK’ or after 8 seconds from the last time
adjustment the oven will start cooking and the ‘cook
time’ display will countdown to zero.
4. The oven will turn off and beep when the ‘cook time’
display reaches zero.
IMPORTANT!
• When you use the ‘cook time’ function, the ‘Finishes
at’ display activates and tells you what time of day the
oven will turn off (based on the set cook time).
• During cooking, you can adjust the cook time with
the Cook time
or symbols.
• When the cook time has elapsed, an audible signal
will sound for two minutes, the oven will switch off
and COOKING FINISHED will be displayed.
• To stop the audible signal, press any of the symbols
on the control panel.
• If you wish to cook a bit longer, press the cook time
symbol for each additional minute you require.
The oven automatically reverts to the function and
temperature previously programmed. This feature
is available for 5 minutes after cooking has finished.
After that, the oven automatically switches off.
Setting the delay end time
The delay end function can be used to switch the oven on
and off at a specific time during the day.
1. Check the clock displays the correct time of day.
2. Select the desired oven function and
cooking temperature.
3. Set the required cook time.
4. Press the ‘delay end’ symbol
to move the end time.
5. Touch ‘OK’ or after 8 seconds from the last time
adjustment the SET icon will light and your oven is
now programmed. The oven will start its cooking
cycle to finish at the set ‘end time’.
6. When the oven has finished cooking, cook time can
be extended or the beeper turned off just as in ‘cook
time’ mode.
7. Touch the ‘delay end’ symbol to move the end
time forward.
8. Touch ‘OK’ or after 8 seconds from the last time
adjustment the SET icon will light and the oven is
now programmed.
The oven will commence its cooking cycle to finish at the
set ‘end time’.
IMPORTANT!
• 30 seconds after a cooking function has started, it is
no longer possible to delay the start time.
• In order to delay a cooking function that has already
started, the oven needs to be switched off then
switched on again and re-programmed.
• Even though the heating element turns off, the oven
will still retain substantial heat. This will continue to
cook food until it is removed or the oven cools down.
If you do not plan on being present when the oven
turns off, you should take this extra heating time
into account.
Loading ...
Loading ...
Loading ...