Loading ...
Loading ...
Loading ...
25
Operating
• The zoom level can be fi nely adjusted. Closely watch the screen to
fi nd the level you want.
NOTE
1.
Press the
ON
ON button of
MAGNIFY
MAGNIFY on the remote control.
The “MAGNIFY” indication will appear on the screen and
the projector will go into the MAGNIFY mode. In the Magnify
mode, the picture will be zoomed. The indication will
disappear in several seconds with no operation.
Using the magnify feature
2.
Use the ▲/▼ cursor buttons to adjust the zoom level. To move the zoom
area, press the
POSITION
POSITION button in the MAGNIFY mode, then use the
▲/▼/◄/► cursor buttons to move the area. And to fi nalize the zoom area,
press the
POSITION
POSITION button again.
To exit from the MAGNIFY mode and restore the screen to normal, press the
OFF
OFF button of
MAGNIFY
MAGNIFY on the remote control.
● The projector automatically exits from the MAGNIFY mode when the input
signal is changed or when the display condition is changed.
● In the MAGNIFY mode, the keystone distortion condition may vary, it will be
restored when the projector exits from the MAGNIFY mode.
1.
Press the
FREEZE
FREEZE button on the remote control.
The “FREEZE” indication will appear on the screen (however,
the indication will not appear when the OFF is selected for
the MESSAGE item in the SCREEN menu (
45 )), and the
projector will go into the FREEZE mode, which the picture is
frozen.
To exit the FREEZE mode and restore the screen to normal,
press the
FREEZE
FREEZE button again.
Temporarily freezing the screen
● The projector automatically exits from the FREEZE mode when some control
buttons are pressed.
● If the projector continues projecting a still image for a long time, the LCD
panel might possibly be burned in. Do not leave the projector in the FREEZE
mode for too long.
AUTO
MAGNIFY
ON
OFF
3
4
POSITION
PbyP
1
2
MY BUTTON
BLANK LASER
FREEZE
MENU
ENTER
Loading ...