Loading ...
Loading ...
Loading ...
36
INPUT menu
INPUT menu
INPUT menu
From the INPUT menu, items shown in the table
below can be performed.
Select an item using the ▲/▼ cursor buttons on the
projector or remote control, and press the ► cursor
button on the projector or remote control, or
ENTER
ENTER
button on the remote control to execute the item.
Then perform it according to the following table.
Item Description
PROGRESSIVE
Using the ▲/▼ buttons switches the progress mode.
TV
FILM
OFF
• This function is performed only for an interlaced signal at the
VIDEO 1
VIDEO 1,
VIDEO 2
VIDEO 2 or
S-VIDEO
S-VIDEO input, and for 480i@60, 576i@50
or 1080i@50/60 signal at the Component,
HDMI
HDMI or
DVI-D
DVI-D input.
• When TV or FILM is selected, the screen image will be sharp.
FILM adapts to the 2-3 Pull-Down conversion system. But these
may cause a certain defect (for example, jagged line) of the picture
for a quick moving object. In such a case, please select OFF, even
though the screen image may lose sharpness.
VIDEO NR
Using the ▲/▼ buttons switches the noise reduction mode.
HIGH
MID
LOW
• This function is performed only for the
VIDEO 1, VIDEO 2
VIDEO 1, VIDEO 2 or
S-VIDEO
S-VIDEO input, and for 480i@60, 576i@50 or 1080i@50/60 signal
at the Component,
HDMI
HDMI or
DVI-D
DVI-D input.
• When this function is excessive, it may cause a certain
degradation of the picture.
3D-YCS
Using the ▲/▼ buttons switches the 3D-YCS mode.
STILL
MOVIE
OFF
• This function performs only at a
VIDEO 1
VIDEO 1 or
VIDEO 2
VIDEO 2 input of
NTSC, and PAL.
• MOVIE is the mode for images with a lot of motions like movies,
and STILL is the mode for images with few motions or completely
still ones like slides.
COLOR SPACE
Using the ▲/▼ buttons switches the mode for color space.
AUTO
RGB
SMPTE240
REC709
REC601
• This item can be selected only for an RGB signal or a component
video signal (except 480i@60, 576i@50 and SCART RGB).
• The AUTO mode automatically selects the optimum mode.
• The AUTO operation may not work well at some signals. In such a
case, it might be good to select a suitable mode except AUTO.
(continued on next page)
Loading ...
Loading ...
Loading ...